industry news

news about the steel structure building industry

What should I pay attention to in the design of the steel structure plant?

Leave a Comment / industry news / By

Compared to the traditional architectural model, its superiority has been favored by many companies.So, what should I pay attention to in the design of the room?Design instructions: The first problem in the design of steel structure factories is the problem of load -bearing.The steel structure plant shall bear building loads, rain, dust, wind, snow loads and maintenance loads.The carrying capacity of the metal sheet is related to the cross -sectional characteristics, strength, thickness, and power transfer of the ripple metal plate.Follow the PUR column.Therefore, when designing the factory, pay attention to the issue of carrying capacity.Steel building plant structure type top plates can be used with wave pattern metal layers and cold curved steel plates.For factory buildings without cranes, the main stand can adopt changes

What should I pay attention to in the design of the steel structure plant? Read More »

Steel structured steel structure design column foundation usually adopts steel concrete stepped or cone -shaped independent foundation

Leave a Comment / industry news / By

It consists of steel plates, hot -rolled steel and cold -processed thin -walled steel.It has the characteristics of high strength, light weight, good toughness and plasticity, good sealability, and uniform material.In recent years, it has been widely used in my country’s construction industry, and has gradually become the third largest main structure of the traditional concrete frame structure and brick -concrete structure. It is known as the rising industry of the construction industry.Today, extensive application, learning and mastering the construction technology and related knowledge of steel structure, and used in actual engineering construction, played an extremely important role in the development and growth of the entire construction industry.Single -floor industrial plant (light steel plant) is generally small columns, roofs (beams)

Steel structured steel structure design column foundation usually adopts steel concrete stepped or cone -shaped independent foundation Read More »

What are the main categories of factory roof systems?

Leave a Comment / industry news / By

It may be unfamiliar with ordinary people or unfamiliar.However, if you work in the factory workshop, you may find the shadow of the factory somewhere.For example, Talk-About-STRUCTURAL-FIRE-PREVENTION-FROM-MECHANICAL-PERFRARANCE-Characterist mechanical production workshop will have driving applications. The driving beam is likely to be steel structure.EssenceIt can be seen that the workshop you work is a room.Steel structure plant

What are the main categories of factory roof systems? Read More »

What is the method of cooling the steel structure plant structure?

Leave a Comment / industry news / By

It mainly refers to the main load -bearing component consisting of steel.Including steel pillars, steel beams, foundations, steel roofs (of course, the span of the factory building is relatively large, basically the steel structure roof is now). The steel cover can also be maintained by the wall of the steel structure.Due to the increase in steel output in my country, many of the houses have begun to use, and it can also be divided into light and heavy steel structure factories.Industrial and civilian building facilities built with steel are called steel structures.1. Insulation and cooling: The heating film of the steel structure plant can separate most of the solar radiation and conduction heat, reducing the indoor constituent greenhouse effect.Then the temperature of the large drop in the plant, change

What is the method of cooling the steel structure plant structure? Read More »

The cooling treatment of the steel structure plant requires the right medicine

Leave a Comment / industry news / By

The cooling treatment requires the right medicine.First of all, find out the factors that affect the temperature of the house, pay attention to the treatment of one -sided problems, and then choose the appropriate method to deal with relatively unnecessary factors to achieve a good indoor environment.https: www.sgsbuilding.comnewsindustrywhat-alre-the-addvantages-of-Stainless-SUNLIGHT-CANOPY I. The factory building heats up and cools down.The heating film of the steel structure plant can isolate most of the sun radiation and conduction heat

The cooling treatment of the steel structure plant requires the right medicine Read More »

Steel structure Factory panel and insulation layer installation

Leave a Comment / industry news / By

How to build, process: The room itself has the characteristics of light weight, high strength, strong pressure resistance, and short construction cycle.At present, many places in my country have many large, diverse and complex and civilian buildings.As a new building model, the steel structure plant sweeps the traditional architectural model with a strong attitude.The emergence of steel structure standard factories helps some manufacturers’ large How-to-Make-Steel-Structures-FireProof.For example, the seismic performance of the steel structure standard plant and the open space meet the needs of the plant.Specific construction process: 1. The main knot of the steel structure plant

Steel structure Factory panel and insulation layer installation Read More »

What are the non -destructive detection methods of steel structure engineering?

Leave a Comment / industry news / By

Non -destructive testing is a common technology in the industry.The lossless detection is a method of testing the surface and internal quality of the inspection parts without damaging the working state or raw materials. It is a common method to ensure.Due to the different components, the non -destructive detection method used is also different.Let’s take a look at the following introduction.Ultrasonic detection: Using ultrasonic energy to penetrate the depths of the metal material, when entering another cross -section from one section, the characteristics of reflection on the edge of the interface, and checking a method of component defects.When the ultrasonic beam is transmitted from the surface of the part from the surface of the part to the metal, the defects and the bottom surface of the part have produced a reflex wave, which is on the fluorescent screen.

What are the non -destructive detection methods of steel structure engineering? Read More »

Fully attach great importance to the adverse effects of thermal expansion and contraction system of steel structure factories.

Leave a Comment / industry news / By

1. Design reason.1. The roof drainage system is not set up in accordance with specifications.When the heavy rain intensity exceeds the discharge capacity of the rainwater system, it will exceed the seams and even overflow the roof, causing an accident.2. The design of color steel pan -water accessories is unreasonable and cannot achieve waterproof effect.3. Insufficient amount of water falling pipes, rainwater flows along the sky ditch for a long distance, causing water leakage; the L on the outside of the wall has not increased, causing the ditch to leak water.4. To set defense cannot meet the needs of grassroots deformation, temperature difference deformation, dry shrinkage, vibration, etc.5. Standardize the deformation control value of the component, the deflection L/180 of the band, the deflection of the roof beam L/180 (the middle L is the curved component

Fully attach great importance to the adverse effects of thermal expansion and contraction system of steel structure factories. Read More »

When the steel structure owners buy materials themselves, what are the problems when choosing the material?

Leave a Comment / industry news / By

When buying materials themselves, some owners only pay attention to the surface paint brush when they choose the materials.How does it feel, component heavy-parture-of-setl-structure-handar is not heavy, which is unrealistic.This is a taboo for selection, so it can only be deceived.A good paint brush is the result of surface kung fu, but too light weight is not practical.Of course, the quality of this material is not guaranteed.You must avoid the choice of these materials.The selection of materials for learning is the right way.When the steel structure company is built

When the steel structure owners buy materials themselves, what are the problems when choosing the material? Read More »

How to make a set of steel structure projects be selected safely from beginning to end?

Leave a Comment / industry news / By

As the name suggests, it is a structural engineering with steel as the main body.It is a steel beam, column and truss composed of steel and steel plates.Due to different materials, their connection methods are different, such as welding, bolts, rivets, etc.Including steel canopy, steel bridge, spiral staircase, etc.A set of qualified ones must not only be safe, but also design safety, must be constructed according to specifications, and so on.It is very important to make a set of steel structure projects safe from beginning to end.Compared with concrete, the steel structure has many advantages, so the steel structure has been widely used.The stability of the steel structure means that the bearing capacity of the steel structure reaches the limit state and is lost

How to make a set of steel structure projects be selected safely from beginning to end? Read More »