Choosing the appropriate method to cool down is a comprehensive problem. First of all, you must find the temperature that affects the temperature https: www.sgsbuilding.comnewscompany-Newshow-Cool-down-Metal-Workshop [123 ] The key factor focuses on managing it and targeted other relative non -necessary factors to reach a good indoor environment and its high cost performance.
How to do a good job of house cooling
Ventilation and cooling
As some machines in the plant have heat and water vapor, if these heat and water vapor are not discharged in time, they will accumulate in the plant, and then the temperature of the steel structure plant will be increased and affects the environment of the steel structure. The solution to these problems is to ensure the reasonable ventilation of the plant and the appropriate amount of ventilation system. A reasonable exhaust system device will significantly improve the air environment of the steel structure plant, and the temperature of the steel structure plant is large.
Device roof forced exhaust fan
Power fan is a ventilation device driven by electricity. Its exhaust effect is good and can adapt to the ventilation of any environment.
Unpowered ventilation is a ventilation equipment relying on air to ventilate the current principles. When the air environment in the room table is different, air flow will occur. Then Clean indoor exhaust gas and heat. Its advantage is that it does not require rated electricity and is more environmentally friendly. However, the environment is strong and cannot be forced to discharge. The products mainly include turbine ventilations, stripe ventilations (lighting belt ventilation), roof spine ventilation, etc.
Instal the roof driving force ventilation. The powerless ventilation is a ventilation equipment that ventilates the principles of streaming by air. When the air environment in the room is different, air flow will occur, and then the indoor exhaust gas and heat will be removed. Its advantage is that it does not require rated electricity and is more environmentally friendly. However, the environment is strong and cannot be forced to discharge. The products mainly include turbine ventilations, stripe ventilations (lighting belt ventilation), roof spine ventilation, etc.
Forced cooling
Forced cooling refers The principle cooling air, the machine that transports the cool air to the room from a strong exhaust man. It can keep the indoor temperature of the steel structure plant at a comfortable temperature of 26-30 ° C. Its power consumption is equivalent to 1/8 of the air conditioner. The cost is the 1/2 of the air conditioner, and it is a good way to force the cooling to cool down.
Inspiration and cooling
The factory building insulation can block most of the solar radiation and conduction heat, reduce the formation greenhouse in the room effect. Then greatly reduce the temperature of the plant to improve the environment of the steel structure plant.
The current commonly used methods are the following two options:
Cover the premium of the steel structure factory house, and Generally, the insulation cotton used on the roof is a glass wool. The installation can usually reduce the indoor temperature by 5-8 ° C. The construction process is messy. Put glass wool online, cover the original roof panel, and then waterproof.
Spray high -efficiency thermal insulation reflex coatings on the roof panel. This product has excellent thermal insulation and insulation performance. All kinds of exterior coatings such as asbestos, plastic, glass fiber reinforcement, rubber and other appearances.