How to choose a multi -layer and single -layer steel structure plant

How to choose a multi -layer and single steel structure plant? I believe that many industrial manufacturers have considered whether to build a steel structure plant, but they don’t know what to build, whether it is a single -story plant or a multi -story plant. Some people even know nothing about the cost of steel structure factories. The following is a difference between the structure arrangement principles of the single -layer steel structure plant and the multi -layer steel structure plant to analyze the differences in the structure of the single -layer steel structure plant and the multi -layer steel structure plant.

Generally speaking, the following principles should be considered when the structure layout of the multi -layer steel structure plant is arranged:

1. The construction requirements should be met. In terms of structural layout, the construction technology should be considered advanced and industrialized. Improved degrees, convenient construction, and reasonable economic.

2. The plane of the house should be as regular, uniform, and symmetrical as possible, and the body shape should be as simple as possible to minimize the reversing effect of the house as much as possible.

3. Increase the overall stiffness of the structure and reduce horizontal displacement. In addition to

Elementor-1972

selected a reasonable structural system, the side displacement of the structure should be reduced from the plane shape and high change. How to choose a multi -layer and single steel structure plant 4. Considering the impact of settlement, contraction, and complex building shapes on the building, it should be reasonably arranged and treated with sedimentation and telescopic joints.

The structure layout of the single -layer steel structure plant mainly follows the following principles:

1. Ensure the vertical and horizontal horizontal stiffness of the structure of the steel structure plant, connect the plane structure to form a hollow structure, improve the steel structure plant plant The overall stability and spatial stiffness.

2. Pass some local horizontal loads (such as vertical wind load and longitudinal powertrain) to the main load -bearing structural components.

3. Ensure the stability of structural components in the construction and use process.

How to choose a multi -layer and single -layer steel structure plant

The above is the relevant introduction about \”how to choose a multi -layer and single -layer steel structure plant\”. You can choose according to the needs of your own factory. The design of Yongyi Steel Structure Engineering, high construction efficiency, and low cost gives reasonable design solutions. Yongyi Steel structure is based on green environmental protection and energy saving, safe and efficient as a large -scale comprehensive steel structure construction enterprise with research and development, steel structure processing, installation and maintenance, and after -sales service.

Report/feedback

Leave a Comment

Your email address will not be published. Required fields are marked *