What are the advantages of stainless steel sunlight canopy?

For many families, whether there are balconies, balconies, or even windows, many people will consider installing a canopy, which is not only beautiful, but also can avoid the intrusion of rain at home and the humidity at home when it rains outside. Therefore, installing a canopy has become an indispensable process for the house now.
There are many types and materials of canopy, such as large canopy, small canopy, shaped canopy, etc. Stainless steel glass canopy is made of stainless steel and glass. Stainless steel canopy has certain advantages in terms of material. What are the characteristics of stainless steel glass canopy?

Classification of stainless steel sunlight canopy

  1. according to the construction location: terrace sunshine canopy, automobile sunshine canopy, courtyard sunshine canopy, etc.
  2. according to the material: aluminum alloy sunlight canopy, steel structure sunlight canopy, glass canopy, sunlight plate sunlight canopy, etc.

Stainless steel glass canopy is a series of high-quality steel pipes with stainless steel frame as the main structure, including stainless steel columns, stainless steel main beams and secondary beams. The stainless steel structure is bent by the cold-formed bending equipment. Generally, the glass is made of two layers of glue to ensure that one layer is broken and the other layer is not damaged.

Characteristics of stainless steel sunlight canopy

The effect of stainless steel glass canopy products is fashionable, elegant, simple and exquisite. The sound insulation effect is good, and the compartment wall has a very good sound insulation effect. There are some main features

  1. Stainless steel glass canopy products can be partially disassembled and reused for many times. Some compartment system materials will not bring waste to the environment. It is a kind of green environmental protection building materials with long service life. In the long run, the installation of high compartment system materials by manufacturers with good separation is cheaper and more cost-effective than the installation of other forms of partition materials.
  2. During the use of stainless steel glass canopy, the positions of doors, windows, physical modules and stainless steel glass canopy can be changed at any time, and can be re combined and reused. After disassembly and assembly of materials, their damage is minimal, and the cost of frequent office relocation can be greatly reduced.

The internal structure of stainless steel glass canopy can facilitate cable laying. There is no need to build walls and embed them. The maintenance and replacement of cables are more convenient. Strong and weak current are separated. The cable trough can play a shielding role for signal lines.

  1. Gedejia stainless steel glass canopy is fire-resistant. The compartment system is all composed of metal structures. Glass, color steel plate and other materials are also fire-resistant. When the internal structure of the compartment system is a steel structure, its fire resistance limit is 30min, 60min or more.
  2. Stainless steel glass canopy high-quality imported shutter can be installed inside two layers of glass, which is not easy to get dirty and free from cleaning.
  3. Stainless steel glass canopy can be made of a variety of materials, including double glass and shutter, color steel plate, gypsum board, melamine board, fireproof board, cloth, etc.
  4. The stainless steel glass canopy has a variety of colors for you to choose from. Each material has a variety of colors, and components of different colors can be used together. You can even specify or provide any color and texture of finishing materials.

Installation method and precautions of stainless steel canopy:

  1. Check whether the framework is flat. There shall be no welding scar or burr on the framework. It must be completely dry and must not contain volatile solvents.
  2. Lay butyl waterproof tape on both sides of the skeleton to form a small water tank.
  3. Place the sunlight board on the skeleton, and pay attention to reserve expansion joints between the boards. In addition, before installation, the protective film around the plate shall be lifted 30mm-50mm. Do not let the profile clamp the protective film, but do not remove too much to avoid damaging the plate surface due to operation.
  4. Press the EPDM strip at the interface between the plates.
  5. Secure with self drilling screws. The self tapping screw shall be tightened with even force to ensure that the profiled plate really compacts the sealant strip and plate.
  6. The frame must be set at 1.05M in the middle of the width of the sunlight plate, which is fixed with self drilling screw sleeve button.
  7. The sunlight plate on the side near the wall shall not be in direct contact with the wall. It shall be fixed on the wall with angle aluminum, and then the sunlight plate shall be inserted for installation.
  8. At the closing part of the sunlight plate, seal the opening with aluminum tape, and then fix the edge strip or angle aluminum.
  9. First, check whether the cutting size and expansion reserve of the plate are appropriate, and pay attention to leaving enough uniform expansion clearance. The calculation formula is as follows: total expansion clearance = expansion coefficient * large temperature before and after local installation * plate length.
  10. In the hollow plate installation project, the part of the plate clamped by the profiled plate must contain at least one rib, or the part clamped at the edge of the plate is 20mm smaller. Identify the anti ultraviolet side of the plate surface and install it outward. It is not allowed to install the anti ultraviolet side inward.

In addition, it should be noted that if the plate needs to be installed by cold bending, the bending radius should not be less than 175 times of the plate thickness, and it can only be bent along the rib direction. It is also necessary to conduct closed water test and inspection after construction.

Leave a Comment

Your email address will not be published. Required fields are marked *